Germany is without doubt, the powerhouse of the European plastics injection moulding industry. A good knowledge of all the active players in the industry is essential if you are involved in this industry whether you are a supplier or a moulder.
AMI's directory gives you...
Publication Year: 2019
Sites Listed: 2162
Make sure you are making the most of market opportunities in the Balkans with verified contact and production data for Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Kosovo, Montenegro, North Macedonia, Romania, Serbia, Slovenia. This is a new compendium featuring both brand new and existing...
Publication Year: 2020
Sites Listed: 924
Polymer demand for injection moulding in this region has developed fast over the last decade.
Make sure you are making the most of market opportunities with verified data listing of over 2028 injection moulding sites in Czech Republic, Hungary, Poland, Slovak Republic, Bulgaria, Romania,...
Sites Listed: 2028
Get instant access to contact details and the production capacity of 7,445 injection moulding sites supplying automotive, building, electrical, medical, packaging amongst other markets.
Find out the following information for each site:
Sites Listed: 7445
Polyamide demand continues its steady recovery at the rate of 2% volume growth per year, following an increase in car production in recent years and a strong demand for electrical goods. Central and Eastern Europe show the strongest growth in the automotive,...
Publication Year: 2018
Sites Listed: 3500
The medical moulding sector has experienced consistent growth over the last few years and Europe is a net exporter of medical technology products such as drug delivery technology, bodily fluid/ nutrition and waste management, diagnostic tools, medical supplies and instruments, corrective...
Sites Listed: 518
The injection moulding industry in France continues to face some challenges largely as a result of the global economic crisis which has forced many companies to rationalise, close or move their injection moulding activities outside Europe.
This directory identifies 884...
Sites Listed: 884
The injection moulding industry in Italy is quite fragmented, with lots of small manufacturing operations. The industry has gone through lots of changes in the aim of becoming more competitive. A number of companies have gone out of business but AMI has...
Sites Listed: 1127
Get a unique insight into the production activities of 926 injection moulding sites in the Middle East including: 584 sites in Turkey, Iran 130 sites and 159 sites for the GCC countries.
The companies included are all manufacturing sites, no resellers or distributors or head offices...
Sites Listed: 926
Engineering polymers have been showing promising growth driven by the automotive sector. Producers are investing in research and development in innovative materials for new applications.
Access contact and production information on 3,363 moulders processing either ABS...
Sites Listed: 3363
This database gives a unique insight into 637 injection moulders in Turkey manufacturing for a range of markets. The companies included are all manufacturing sites, no resellers or distributors or head offices are included. Each company has been directly contacted and all...
Sites Listed: 637
Find out the following information for 2270 injection moulding sites using the engineering polymers ABS or SAN as resins or compounds.
Sites Listed: 2270
Find out the following information for 970 sites using the engineering polymer acetal for automotive, electrical and other engineering applications.
Sites Listed: 970
Find out the following information for 663 sites using the engineering polymer PMMA to make electrical components and items for the transport market.
Sites Listed: 899
Find out the following information for 807 sites using the engineering polymer PC to make electrical components and items for the transport market.
Sites Listed: 807
Find out the following information for 548 sites using large amounts of the engineering polymer PBT and serving the automotive, domestic appliance and electrical sector.
Sites Listed: 548
This directory gives a unique insight into the activities of 1011 injection moulders in the Iberic peninsula: Spain 790 sites, Portugal 221 sites. The companies included are all manufacturing sites, no resellers or distributors or head offices are included. Each...
Publication Year: 2017
Sites Listed: 1011
There has been much consolidation of the injection moulding market in the UK in the past few years with many companies now outsourcing production or even relocating abroad. If you are looking for a complete and up-to-date picture of the whole industry, this new...
Sites Listed: 827
This publication identifies over 310 injection moulders in Belgium, Luxembourg and the Netherlands.
For each site it provides the following information:
Sites Listed: 310
Around 12% of PP demand in Europe is for the automotive sector; which is expected to keep increasing, especially in Eastern Europe to satisfy growing automotive production rates.
To keep you updated on polypropylene consumption in the automotive...
Sites Listed: 2020
Find out all about 458 sites producing automotive parts for: exterior, interior, under the bonnet applications.
We supply the following for each site:
Sites Listed: 458
Find out all about 840 sites producing the following electrical goods: electrical components (connectors, plugs, sockets, switches), telectronic (components for TV, mobile phones, computers..) and electrical/domestic appliances (components for washing machines, dryers, dishwashers...
Sites Listed: 840
The recovery of the injection moulding industry in Nordic countries has been slowed down by a weak demand in the building and automotive sectors and some significant rationalisations in the packaging industry.
This 6th edition of AMI's directory of injection moulders in...
Publication Year: 2016
Sites Listed: 457
The plastics industry in Romania is showing the strongest growth in the region and polymer demand is expected to continue advancing robustly, particularly in the food packaging sector.
Expanding the series of data on the thermoplastics processing industry in Central Europe, AMI has...
Sites Listed: 270
Expanding the series of data on the thermoplastics processing industry in Central Europe, AMI has undertaken detailed research in this area and has produced a directory listing 139 plastics processors in Slovenia. This database provides key information on all the significant players in the...
Sites Listed: 139
We have expanded our research on plastics processing in the Balkans, to produce a verified database of 111 plastics processors in Croatia.
For each site we have collected the following information:
Sites Listed: 111
We have expanded our research on plastics processing in the Balkans, to produce a verified database of 231 plastics processors in Serbia.
Sites Listed: 231
The plastics industry in Bulgaria is relatively small but polymer demand growth has been driven by investments in the packaging sector. This new database will enable you to understand who are the key plastics processors in this region, with 154 plastics...
Sites Listed: 154
This publication is an essential reference document if you want to know more about the location and production of thermoplastics processors in Hungary.
Following the continued growth of the thermoplastics processing industry in Central Europe, AMI has undertaken detailed research in this...
Sites Listed: 406
The Czech Republic and Slovakia are two leading economic players in Central Europe. They have attracted large volumes of foreign investment which is generating economic growth.
AMI's latest data on plastics processors in the Czech Republic and Slovakia...
Sites Listed: 767
Switzerland is a stable market for injection moulding, it is the only country in Western Europe where AMI has identified a slight increase in the number of production sites in the last 3 years. The injection moulding industry in Switzerland has a strong focus on manufacturing...
Publication Year: 2015
Sites Listed: 242
The demand for innovative plastics closures is growing fast. In order to grow profitability caps and closures manufacturers have to innovate whilst increasing capacity and making sure they deliver quality products.
This AMI database will give you an insight into the industry with...
Sites Listed: 537
Sites Listed: 289
Ireland is world-renowned as a hub for medical technology manufacturing, with injection moulders playing a key part in supplying this dynamic sector.
Enhance your business planning with access to AMI’s database , giving key insight into the production activities of 93...
Sites Listed: 93
Africa is one of the most exciting markets for plastics processing in the world today. It is a vast continent with a growing, youthful population and a rising consumer demand for plastic products.
However this is a very complex market to research and has numerous...
Sites Listed: 1,018
Africa is a very complex market to research and has numerous languages....
Sites Listed: 529
The Nordic countries have a well developed thermoplastics processing industry with a consumption of around 1.9 million tonnes of polymers per year.
A database from AMI gives you the opportunity to access information on all the plastics processing sites in...
Sites Listed: 683
This database gives you key data on all the players in the thermoplastics processing industry in the region.
AMI has gathered location and production information on 524 manufacturing plants: injection moulders, blow moulders, rotational moulders, PE film extruders,...
Sites Listed: 524
Polymer demand in Switzerland is around 500 000 tonnes per year. Switzerland has a large well developed injection moulding sector serving some niche markets such as electrical, technical and medicat markets.
A database from AMI gives you the opportunity...
Polymer demand in Austria is around 710 000 tonnes per year. Austria has a well developed injection moulding sector that counts the automotive, electrical and medical as its highest serving markets.
Sites Listed: 243
Italy remains the second largest market for thermoplastics in Europe despite a continuous decline in polymer demand since the 2007 recession.
This AMI database of 1946 plastics processing sites in Italy saves you time with instant access to data...
Sites Listed: 1946
Plastics processing in Nigeria dominates the region because of its vast population whilst Ghana and Ivory Coast have shown substantial growth in plastics usage in recent years. Senegal and Cameroon have similar growth rates which indicate promising future for the plastics...
Sites Listed: 121
The plastics market in South African countries is well developed and serves both local demand and surrounding export markets, packaging building and automotive being the main ones.
AMI offers you the opportunity to understand this market...
Due to its favourable geographic position and a local growing demand for plastic products, the North African plastics market is developing faster than other African countries.
This is a very complex market to research and a real challenge to find good...
Sites Listed: 442
Kenya has an established plastics processing sector and Ethiopia continues to develop as a significant base for major regional plastics processing activities.
Finding good information about who are the players in the market is a real challenge. AMI has risen to this...
Sites Listed: 145
PVC demand reached 6.6 millions tonnes in Europe in 2018.
Stay up to date on this market with this database listing 1834 PVC manufacturing sites in Europe and shows the following information for each site:
Sites Listed: 1834
PVC is still the dominant and most economic plastics option for the manufacture of window and door profiles. Plastic window frames is the favoured solution in a number of countries in Western and Central Europe. This AMI database lists 279 production plants in Europe...
Sites Listed: 279
Turkey is the largest market for plastics processing in the Middle East. An insight into the activities of all significant processors of PVC is now available with AMI's database.
This AMI database gives contact and production details for 203 PVC processors in Turkey....
Sites Listed: 203
Plastics Processors in France gives you the opportunity to have an up-to-date picture of all the players in the industry. This database includes 1370 plastics processing sites: injection moulders, blow moulders, rotational moulders, PE film extruders, cable extruders, pipe extruders...
Sites Listed: 1370
The United Kingdom is the fifth largest market for polymer resin in Europe. It is a well established market, with injection moulding and film extrusion by far the biggest thermoplastics processing industries. Recent years have seen manufacturing shift to lower production cost areas in...
Sites Listed: 1333
Ireland has a small but dynamic thermoplastics industry, as the country has been attracting high technology companies, particularly in the field of medical technology manufacturing. Plastics production is diverse, encompassing a wide range of technologies with injection moulding, film extrusion...
Sites Listed: 138
This unique database lists over 576 injection moulders and sheet extruders supplying thin wall packaging to the food industry for dairy, ice-cream, yellow fat, bakery, confectionery, meat/fish, fruit/vegetables, ambient, chilled, fast food, frozen and ovenable...
Sites Listed: 576
Nearly 3.5 million tonnes of polymers were processed in the Iberic peninsula in 2016. AMI has gathered information on 1622 manufacturing sites processing commodity and engineering polymers in Spain and Portugal for the following processes: Blow moulding, Cable extrusion, Injection...
Sites Listed: 1622
Turkey is the largest plastics market in the Middle East with a growing youthful population and a strategic location easily accessible to European markets.
This new directory gives you the key to access this developing market and all its key players. AMI has thoroughly researched,...
Sites Listed: 1130
Austria has a large number of sophisticated, technical moulders with over 40% of them serving the electrical and electronic markets. This publication identifies over 189 injection moulders in Austria. For each injection moulding site, the database provides the following...
Sites Listed: 189
Investments in plastics manufacturing are growing signficantly in the Middle East. Fuelled by an increasing local demand, the plastics processing sector in the GCC offers lots of growth potential in the future.
However this is a geographic area very...
Sites Listed: 473
Over 3 million tonnes of thermoplastics were processed in Iran in 2016. This developing market offers huge potential for the infrastructure and consumer packaging sectors.
The massive challenge is to find good quality information on the players in the...
Sites Listed: 303
The demand for thermoplastics in Poland is driven by consumer goods, domestic appliances and the automotive sector.
Gain key insight into plastics processing in Poland and all its players, with instant access to 1052 plastics processing sites in Poland.
For each site...
Sites Listed: 1052
Germany is the largest market for thermoplastics in Europe: its central location and strong manufacturing market continues to ensure the growth of its plastics industry and this database gives you the opportunity to find out the polymers processed and machinery used by all the...
Sites Listed: 2618
The use of PET preforms in the production of bottles has definite cost, flexibility and environmental benefits.
A new database from AMI gives you the opportunity to have an up-to-date picture of all the players involved in...
Sites Listed: 195
AMI has identified 196 injection moulders in Europe producing pipe fittings and can supply you with this unique database which gives the location, contacts and production details of all these manufacturing sites. This database shows for each...
Sites Listed: 196